How to Create a Squiggly Frame Pattern in Microsoft Excel
Steps
 Become familiar with the basic image to be created:
The Tutorial

Complete all changes in the upper Defined Variables section.
 Enter On=0,Off=1 cell A4 = 1
 Enter Adjuster = 1
 Enter TURNS = 9
 Enter S's Count = 25
 Enter Var = 12
 Enter Divisor = 39,708,609,295
 Enter top="=ROUND((B4*PI())+(Adj),0)" 9679383
 Enter YN = N
 Enter Power = 2
 All the rest are the same as they were before.

Complete all changes in the upper Columnar Formulas section.
 c = 24625 as the result of "=ROUND(EXP((PI()^2)+(Cc*(db))),0)+Designer"
 Enter to D7:D1447 w/ D7 active "=X7/Divisor+IF(COS((ROW()7)*PI()/180*Factor)<0,ABS(COS((ROW()7)*PI()/180*Factor))^Power*1,COS((ROW()7)*PI()/180*Factor)^Power)"
 Enter to E7:E1447 w/ E7 active "=Y7/Divisor+IF(SIN((ROW()7)*PI()/180*Factor)<0,ABS(SIN((ROW()7)*PI()/180*Factor))^Power*1,SIN((ROW()7)*PI()/180*Factor)^Power)"
 The External Ring and GMLL x,y and GMSL x,y formulas are unchanged. All other formulas and lookup tables are unchanged.
 Check that F7:F1447 with F7 active contains "=IF(A7=0,F6,((PI())*((SIN(B7/(C7*2))*GMLL*COS(B7)*GMLL*(COS(B7/(C7*2)))*GMLL)+D7)))"'
 Check that G7:G1447 with G7 active contains "=IF(A7=0,G6,((PI())*((SIN(B7/(C7*2))*GMLL*SIN(B7)*GMLL*(COS(B7/(C7*2)))*GMLL)+E7)))"
 Check that Sync1 refers to H2 and Sync2 refers to J2. Check the H2 formula, "=H1/GMLL" and check the J2 formula, "=J1/GMSL".
 Check the H7 formula, "=F7*GMLL*Sync1" and the I7 formula, "=G7*GMLL*Sync1".
 Check the J7 formula, "=F7*GMSL*Sync2" and the K7 formula, "=G7*GMSL*Sync2".
 Check that the lookup tables are unchanged.
Explanatory Charts, Diagrams, Photos
 (dependent upon the tutorial data above)

Create the Chart.
 Edit Go To cell range F7:G1446 on the Data worksheet and using Chart Wizard or the Ribbon, select Charts All/Other, Scatter, Smoothed Line Scatter. Copy the Chart to the Chart worksheet and expand it with the doubleheaded arrow via the bottom right corner.
 Select Chart Layout and get rid of the axes and grid lines and legend; select Data Series 1 and make Line Weight 1 color Deep Purple from the Color Wheel.
 Create the second chart with Plot Area background Black Fill. and paste in the GMLL and GMSL series and edit the series if they've arrived wrong until they read in the formula bar as follows:
 =SERIES(,DATA!$H:$H46,DATA!$I:$I46,1) Burgundy Red
 =SERIES(,DATA!$J:$J46,DATA!$K:$K46,2) Turquoise (Blue)Green
 =SERIES(,DATA!$F:$F46,DATA!$G:$G46,3) Blue Purple

Copy the live formulas and Paste Special Values then too to Saves, then Do Copy Picture and Paste Picture from the Chart with the Shift Key depressed to Saves and Save the workbook.Do so for each modification in the Tips section below.

Squiggly Eye at Alpine
Helpful Guidance

Make use of helper articles when proceeding through this tutorial:
Community Q&A
Search
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.

Squoggle Sierra Foto

Squiggly Sierra 2

Squiggly Lowell Hanggliding

Squiggly Ys at Alpine

Squiggly Eye at Alpine
 The following were done with Power=1,2,3, etc and then Divisor set to 36 and Power=12 and TURNS = 1, etc.
Spcl Design 08a Frame Oval

Spcl Design 08c Frame Diamond

Spcl Design 08d Twisted Cross

Spcl Design 08e Circuitry
Warnings
 ERRORS: If there are errors or error values, either the sheet in incomplete and needs further input or Lookup Tables for critical variables or perhaps there's a mistake somewhere along the line. If the instructions have been completed and there are still errors, select the cell that has the error value that is furthest left and topmost first. Look for a typo in a formula or unmatched parentheses. Possibly, a Defined Name is wrong  they need to be input into the formulas exactly as they were defined. Do Insert Name Define to check. If there is a #DIV/0! error, the example does not, so look for a variable that somehow did not get filled in with a value perhaps. At any rate, what to do is select the cell with the error, and after checking all those typical errors, do Tools Auditing Trace Precedents and/or Trace Error. If fixing all the topmost leftmost errors does not fix the rest of your errors on the worksheet, one may need to do it the hard way, from the bottom right upwards then leftwards; that is the slow but sure way to fix all errors.
 Also, errors in the chart data will most likely plot as zeroes. This may be acceptable or desirable even. However, if too many lines (or curves) are returning to 0, it may indicate a logical flaw in the data  or too many tiny values and then perhaps rescaling the chart is needed by inspecting the horizontal and vertical axes and changing them to zero in on the problem. Hover over or click on a data marker on the series plot and then do a search in the proper column by value for that value, and identify its precedents.
Video: How to create wavy borders with Cricut Design Space
Related News
How to Encourage a Child to Do His Homework
Heartbreaking and Horrifying Stories of People Detained At Airports Are Emerging
Minocycline Reviews
Experts Warn Regularly Using Bleach Could Increase Risk Of Lung Disease
How to Straighten Your Teeth Without Braces
How to Prune a Dogwood
How to Determine if Your Oregon Massage Therapist Is Licensed
18 Cute Braided Ponytail Styles
7 Brain Games To Make You Smarter
There were a ton of people shopping when we visited, though it really felt more like a gallery than a store
MORE: Playlist: 10 Songs to Bring Out Your Inner Canadian
MS reveal they are considering shutting down their Per Una range
How to Choose a Makeup Bag
Date: 02.12.2018, 12:24 / Views: 53393